|
National Calibration Inc. provides comprehensive calibration and repair services
to a vast spectrum of industries that include aviation, automotive,
commercial contracting, educational institutions, manufacturing
firms, materials testing laboratories, public utilities, and state agencies.
With custom reports responsive to your unique requirements, electronic recall
notices, on-site capabilities and a fleet of mobile calibration vans, NCI
delivers you one-stop calibration and repair of test and
measurement equipment.
Electronics
|
NCI maintains all the standards to calibrate a broad
range of electronic equipment. Directly connected to WWVB, NCI has full
frequency capability along with voltage calibration on dielectric testers
and hypots, phase meters and power supplies up to 25 Kv. You can call us
for calibration of your:
- Battery Chargers
- Multimeters
- Frequency Counters
- Function Generators
- Meggers
- Oscilloscopes
- Decade Resistance Boxes
- Clamp-on Ammeters
- Panel Meters
|
Return to Top
Force / Load / Weight
|
NCI is an industry leader in force calibration.
Our Morehouse proving rings
are accurate to .003 % of reading and are NIST traceable. We have the standards
to certify a wide range of force equipment including: compression / tensile
machines, electronic balances, and scales.
NCI is the authorized calibration and repair
representative for Forney Inc. in Arizona, Nevada, New Mexico, Texas and Utah.
Our factory trained personnel have years of experience and
will always complete the job with customer satisfaction being our top priority.
We pride ourselves on our ability to calibrate and certify a wide range
of force equipment including cable stressing jacks, pipe testing machines
(D-loaders), and tensile testers.
NCI is also a factory authorized sales and
service center for A&D Balances. Call or email our
sales department for pricing and availability. All sales include setup,
calibration and UPS ground shipping. With
roots in the materials testing industry, NCI is unsurpassed in our knowledge
of ASTM and AASHTO specifications and in servicing:
|
|
- Balances and Scales - .0001 gm to over 500 lbs.
- Compressive / Tension Machines - 0 to 600,000 lbs.
- Dynomometers - 0 to 100,000 lbs.
- Force Gauges / Spring Scales
- Load Cells and Dial Indicator Proving Rings 0 to 100,000 lbs.*
- Hardness Testers
|
*NCI can calibrate some pancake load cells up to 500,000 lb.
|
|
|
Return to Top
Tension / Torque
The CDI Model 2000 Torque System is the core standard for NCI's
torque and tension calibration. The CDI Multitest was developed under contract for the U.S. Air Force and
is the the most sophisticated torque calibration system available today.
If your calibration needs include:
- Torque Wrenches and Screwdrivers - 0 to 2,000 ft. lb.
- Torque Multipliers
- Force Gauges
- Torque Testers
- Cable Tensiometers
|
...then NCI is your best calibration source.
|
Return to Top
Linear / Dimensional
If your calibration needs include calipers,
micrometers, dial indicators, gauge blocks or most other linear measurement
devices, NCI is your calibration source.
- Calipers
- Dial Indicators
- Micrometers
- Depth Gauges
- Protractors
- Precision Squares
- Levels
|
Repair services are available for most items.
|
|
Return to Top
Pressure / Vacuum
|
National Calibration Inc. can solve all your pressure
and vacuum calibration needs. With an accuracy of .01%, our deadweight
and digital standards are unsurpassed. We utilize DHI, Ametek and Mensor
standards for all pressure and vacuum calibrations.
|
- Pressure Gauges ± 0.1% , Absolute to 12,000 psig
- Pressure Transducers ± 0.1%, 0 to 12,000 psig
- Compound Pressure Gauges
- Differential Pressure Gauges
- Deadweight Testers
|
|
Return to Top
Aviation Equipment
| NCI calibrates and repairs equipment for some
of the leading airlines as well as many smaller companies in the aviation
industry. In addition to the routine equipment such as torque wrenches
and pressure gauges, National Calibration can also certify:
- Aircraft Weighing Kits
- Altimeters
- Battery Chargers
- Cable Tensiometers
- Fuel Quantity Test Sets
|
- Pitot Static Test Sets
- Power Supplies
- Temperature Test Sets
- Multimeters
|
|
|
Return to Top
ASTM / AASHTO Calibrations
|
National Calibration Inc. began services in 1955 as an in-house
calibration company for Western Technologies Inc.,
an environmental, engineering and materials testing company. Our familiarity
with ASTM and AASHTO test requirements is unsurpassed in the calibration
industry. From compression machines and concrete air meters to Schmidt
hammers and Gilmore needles, NCI has the experience to certify it. With
strict adherence to the requirements of AMRL, CCRL and other certification
agencies, we can make sure your calibrations pass inspection. Licenced by
the N.R.C., National Calibration also has the standards to calibrate nuclear
density gauges. NCI calibrates:
- Concrete Air Meters
- Speedy Moisture Testers
- Compaction Hammers
- Marshall Stability Test Machines
- Liquid Limit Devices
|
- Stabilometers
- Ovens
- Balances and Scales
- Proving Rings
- Thermometers
|
|
Return to Top
|
